◆With high-end microcontroller as the core,High precision, stability and reliability;                                 b>

◆Centralized control, simple wiring, easy installation;

◆Replaces the traditional multiple relay protection mode;

◆With over-voltage, low-voltage, over-current and overload protection functions;

◆It has the functions of speeding, high and low frequency, and short circuit protection;

◆Inverse time control is adopted for the protection of overcurrent, overload and short circuit;

◆The parameters can be modified in real time for special generators; all parameters are password protected;

◆Fault indicator, buzzer alarm, four-digit digital display three-dimensional fault judgment.

◆Digital displayGenerator voltage, current, frequency.

◆Applicable scope: All kinds of medium and small high-voltage and low-voltage generator sets

◆input signal

(1) PT voltage: a. Nominal 100V generator PT (voltage transformer) voltage

b. Nominal 230V generator phase voltage

c. Nominal 400V generator line voltage

(2) Three-phase current: nominal5A generator three-phase CT (current transformer) current signal

◆Output signal: Relay switch signal (normally open)

a. Fault output (for disconnecting grid-connected switch)

b. Flying protection output (used to control governor deceleration or "water bypass")

◆ Voltage measurement accuracy:±1%

◆ Current measurement accuracy:±2%

frequencymeasurement accuracy:±0.01%

◆Working power : AC 150V～360V   DC 200V～250V

◆Power consumption : less than 6W

◆ Work Environment
       Ambient temperature:-5℃～＋45 °C
       Relative Humidity: not more than 90% ( 40℃)
       ElevationArea below 2500 meters
    ◆Dimensions: (long)< span style="font-size:18px;">120×(W) 120×(D) 120mm

    ◆． Hole size: 114×114 (113×113)